Set-up is a combination of a light plus flash.Ĭonsider purchasing the SeaLife Wide Angle Lens (SL975).
(dual lights) or/and external flash accessory. If you are using only one light, considering adding another light Keep your shooting distance inside of 2ft to 3ft, depending on There are advanced color correction modes, Please feel free to contact me if you need further information If this does not resolve your problem, there might be a short in the switch circuit and the camera will need to be disassembled to resolve this error.
Look into the sd slot and if you can see the switch, use a needle to pull the little tab down toward the base of the camera by about 2mm or until it works being careful not to bend it. It is incredible difficult to fix this switch because of space limitations in the sd card. If you put a locked card into a camera without a sd lock switch, you would still be able to use the card normally. When locked card is inserted, the tab is depressed and tells the camera that the card is lock.Ĭontrary to popular belief ,the little tab on the sd card is not an electronic switch and does not physically influence the card operation itself. When no card is inserted / no write protection, the switch is open and thus the protection is off.Ģ. If you open you sd slot and look inside with a sharp light, you should be able to see on the left side of the slot there is a little copper or spring steel lever switch. the problem is with your card reader in your camera. If the error is still displayed after you did the above, you might want to try the card in another camera. All you need to do is to take out the memory card and switch the lever on the left side to the unlock.
OK, if the memory card itself is locked, you might sometimes get this error code.
0 kommentar(er)
